Continuing MultiBoot 2016 article everything you need to know in part 2 of this Tuan introduces Windows 10 PE. I have integrated both Windows 10 PE x64 (64 bit) and x86 (32 bit) into ISO Multiboot and as introduced in Part 1 you can completely use 1 Windows 10 PE or x64 or x86. And here is a choice note if you only use your computer.
If your computer defaults to UEFI boot or Legacy boot but is installing Windows 64 bit, you should only select Windows 10 PE x64 and edit the boot menu as Tuan instructed in part 1.
If your machine boots Legacy by default and is installing Windows 32 bit, only select Windows 10 PE x86.
You can only use 1 of 2 Windows 10 PE (W10pe64.wim or W10pe32.wim in WinPE folder) this applies to ISO MultiBoot if using another Win PE will probably fail to boot.
If your BIOS has two USB Legacy and USB UEFI boot modes, if you choose to boot USB Legacy, you can enter the Multiboot interface as introduced in part 1. If you choose USB UEFI, it will boot into Windows 10 PE x64.
Windows PE boot by default takes Ram as storage so machines without HDD can still boot.
This Windows 10 PE is made from Windows 10 Pro build 10240 version and does not integrate software so booting into the machine will be very fast.
Instructions to fix Windows 10 PE W10pe64.wim and W10pe32.wim
To fix W10pe64.wim and W10pe32.wim you need to move to the Win install drive, usually drive C, then right-click to remove the Read only option if any.
Create a folder in drive C to get whatever name it is, for example, WinPE
Next, you download the DISM GUI software and run the software with administrator rights
1. Select W10pe64.wim or W10pe32.wim.
2. Select a folder to mount Win PE to it as above, I choose the WinPE folder you just created.
3. Click Mount WIM to decompress W10pe64.wim or W10pe32.wim into WinPE folder.
4. The decompression process will take about 30 seconds to 1 minute
When the decompression is finished, you are not allowed to turn off the DISM GUI software but leave it there to fix it and mount. If you turn off by mistake, you must delete all the compressed files and run the software to choose again.
When the mount is successful, you will be able to access the decompression directory as shown below
Below Tuan lists a few messages that you can fix.
Change the default wallpaper in Windows 10 PE
Remove or replace the boot sound.
Add portable software note this software must be able to run under Windows PE
Add the image to the System properties dialog box
...
1. To replace the default wallpaper, go to the Windows 10 PE unzipped folder, choose Windows> Web> Wallpaper> Windows to replace the original picture with your own, note that the picture has a maximum resolution of 1366x768.
2. Delete or replace the boot sound, access Windows> Media, if instead, choose the sound format wav or mp3.
3. To add an image to the System properties dialog box, select a 120x120 bmp-sized image with the name oemlogo to copy the image to Windows> System32 as shown in the below image.
Guide to download and create bootable USB with MultiBoot 2016
MultiBoot 2016 everything you need to know - Part 1
MultiBoot 2016 everything you need to know - Part 4
Integrate Win 10 PE into DualBoot HDD with Windows 10
MultiBoot 2016 everything you need to know - Part 3











0 commentaires